Retailers Support & Downloads

Listados abaixo estão as categorias de sistema suportadas. Cada seção contém software, atualizações, drivers de impressora do Windows, correções, manuais e perfis de cores aplicáveis ao sistema.

 

Announcements

Select the system to find updates, patches, firmware, content, user guides and more.

KODAK Picture Kiosk

Select your KODAK Picture Kiosk System to find the latest software and content updates

KODAK Picture Kiosk Version 8.1 Application Software on the KODAK Picture Kiosk

IMPORTANT
This update requires APEX V8.0, KPK V8.0, or KPK+ V3.0. This release adds support for the KODAK D4600 Photo Printer, and addresses several reliability issues.
Release Date
File
APEX_KPK_V8_1_KPK_+_V3_1.zip
System Requirements

Operating System Compatibility
WINDOWS 7, WINDOWS XP, WINDOWS VISTA

Processor Speed
INTEL PENTIUM IV, 1.2 GHz

Memory
512 MB minimum, 1024 MB recommended

Hard Disk Space
500 megabytes

Language Support
English

Installation Instructions

Installation Instructions

  1. From the Main screen of the Kiosk, touch:
    • [Setup] Enter the password if necessary.  
    • [Install Software]
  2. Insert the 8.1/V3.1 Application Software CD into the Kiosk.
  3. At "Software Installation", touch [Check for Media].
  4. At "Installation CD Detected", touch [Install].
    The Kiosk restarts.
  5. When "Installation Complete" appears on the Kiosk:
    • Remove the CD from the CD drive.
    • Touch [OK].
  6. Does “KPK V8.1” or “KPK+ 3.1” appear in the lower left corner of the Main screen on the Kiosk?
  7. Install the software on each additional Kiosk.
  8. Store the CD in the sleeve.
    Installation is complete!
     

Installing the Version 8.1/3.1 Application Software
on a Multi-Station Picture Kiosk

 

 IMPORTANT

 

If you have a multi-station Kiosk, you must install the V8.1/3.1 software on the Host Kiosk. The Host Kiosk will install the software on the Satellite Kiosk(s) automatically.

Yes No
Continue with Step 3.
  1. Touch [Setup]. Enter the password if necessary.
  2. Touch:
    • [Configure System Settings]
    • [Kiosk Network]
    • [Join/Leave Kiosk Network]
Yes No
This is the Host Kiosk.


  1. Touch: [Start Over].
  2. Continue with Step 4.
  1. Touch:
    • [Start Over]
    • [Exit]
  2. Repeat Seps 1 - 2 for each additional Kiosk, until you locate the Host Kiosk.
System being serviced.Please come back later.
 
  1. Do you know which Kiosk is the Host Kiosk?
  2. Does a check mark appear in the check box next to "Host Kiosk Network"?
  3. From the Main screen of the Host Kiosk, touch [Setup]. Enter the password if necessary.
  4. Touch [Install Software].
  5. Insert the V8.1/V3.1 Application Software CD into the Kiosk.
  6. At "Software Installation", touch [Check for Media].
  7. At "Installation CD Detected", touch [Install].

     NOTE

    The installation will take some time depending on your network connection and equipment. Once the Satellite Kiosk(s) displays the Service Mode message, you can leave the Kiosks unattended until they restart.

  8. Wait for "Installation Complete" to appear on the Kiosks.
  9. When "Installation Complete" appears on the Kiosk(s):
    • Remove the CD from the CD drive.
    • Touch [OK] on each Kiosk.
  10. Does "KPK V8.1" or "KPK +3.1" appear in the lower left corner of the Main screen on each Kiosk?
    Yes No
    Continue with Step 11. Install the software again. If it still does not appear,contact KODAK Service and Support.
  11. Store the CD in the sleeve.
    Installation is complete!

For any questions regarding Kodak Moments services and support you may contact us at servicesandsupportsolutions@kodakalaris.com or 1-800-248-6485.

 

Subscrever Retailers Support & Downloads