Retailers Support & Downloads

Listados abaixo estão as categorias de sistema suportadas. Cada seção contém software, atualizações, drivers de impressora do Windows, correções, manuais e perfis de cores aplicáveis ao sistema.

 

Announcements

Select the system to find updates, patches, firmware, content, user guides and more.

KODAK Picture Kiosk

Select your KODAK Picture Kiosk System to find the latest software and content updates

305 Printer Firmware for the KODAK Picture Kiosk V3.10

This updated firmware supports new print sizes for 2" and 3" miniprints.  KPK+ V10.2 (or later) software is required to make these new print sizes, and will automatically install this version of the firmware.  This firmware is backwards-compatible with older versions of KPK+ software.

Release Date
File
Kodak_305_Printer_Firmware_V3.10.exe
Installation Instructions

Installing the V3.10 Firmware for the KODAK 305 Photo Printer on the KODAK Picture Kiosk


Install the firmware on all 305 Printers connected to a KODAK Picture Kiosk.
IMPORTANT: Before you begin, make sure that:
• All Printers are connected, and listed as FOUND in Device Health Check.
• Each Printer indicates a “Ready” status on the display of the printer.


1. Make sure that the power for the printer(s) is on, and each printer indicates a “Ready” status.
2. From the Main screen of the Kiosk, touch [Setup]. Enter the password if necessary.
3. Touch [Install Software].
4. Insert the CD into the CD-RW drive, or the USB Thumb Drive into an available USB Port.
5. At “Software Installation”, touch [Check for Media].
6. At “Installation CD Detected”, touch [Install].
7. At “Ready to Install the Program”, touch [Install].
Wait while the firmware is installed. This can take up to 5 minutes per printer.
The Kiosk restarts and a backup occurs.
8. Does “Ready” appear on the printer(s)?
9. At “Installation Complete”:
• Remove and store the CD or USB Thumb Drive in the software wallet.
• Touch [OK].
The Printer Firmware is now installed on all 305 Printers connected to your Kiosk.


Verifying that the Firmware is Installed
1. From the Main screen of the Kiosk, touch [Setup]. Enter the password if necessary.
2. Touch:
• [Diagnostics]
• [Application Health Check]
3. Verify that “KODAK 305 Printer FW Update V3.10” appears.
4. If “KODAK 305 Printer FW Update V3.10” does not appear, install the firmware again.
If it still does not appear, contact Service and Support.
5. Touch:
• [Continue]
• [Start Over]
• [Exit]

For any questions regarding Kodak Moments services and support you may contact us at servicesandsupportsolutions@kodakalaris.com or 1-800-248-6485.

 

Inscrever-se em Retailers Support & Downloads